Warung Bebas

Rabu, 01 April 2009

The Benefits of Growing Algae in Your Water Filter

One of the factors that's often overlooked in our efforts to replicate the health of non-industrial cultures is water quality. Traditional cultures don't drink sterilized, chlorinated, fluoridated tap water. They drink from natural flowing streams and lakes, complete with their natural minerals, and... algae.

With every gulp, they ingest millions or even billions of tiny green organisms entirely missing from the modern water supply (1).

Fortunately, we can drink algae water too. As a matter of fact, millions of lazy people are doing it right now! All you have to do is buy a clear water filter, use it regularly and leave it in the sun. Over time, you'll develop your very own film of algae that will constantly shed into the water you drink. Here are some of the benefits of algae water:
  • Adds oxygen to the water, increasing your energy on a cellular level!
  • Probiotics in every cup
  • Algae are full of vitamin K. Who needs spinach!
  • Make your own biofuel
4 out of 5 scientists agree that a cup of algae water equals 3.7 servings of vegetables (2).

April fools!

Selasa, 31 Maret 2009

What did they take when they left? Part 3 - Where did it go and what did they take?

Howdy Reader,

In the prior posts in this series we've talked about how to determine if our suspect burned a CD and then what programs he ran before he left. In this post we will discuss ways our suspect could have taken out of the system and how we can find out what they took. There are several options available to someone who wants to take data depending on the environment they are in. They could burn a cd (which we talked about before), send out an email via their companies servers, send out an email via a webmail service, copy the data to a external drive, copy data to another network location or upload data to a web based file hosting service are the most common. Any combination of these methods can be used so we have two challenges:

  1. We need to determine what method or methods they used to take data from the system
  2. We need to determine what files they took using these methods


Method 1 – Email via corporate servers

  1. How did they take data from the system

How we are able to recreate activities will depend on the email system they have in place. Typically a suspect using this method will be emailing files and forwarding messages to their personal account. The sophistication of the suspect is pretty low in this method but occasionally even these suspects will delete these messages. Every email system has its own particular quirks for the recovery and analysis of messages, enough so that we will have separate posts to deal with each one at a later date. In most cases if a user has deleted the email messages we have three sources of recovery:

  1. Recovery of deleted messages from the local system


    When an email is sent from a suspect's system it is typically saved in the local and possible the server side 'sent' box. How we recover the message depends on how much time has passed since the user deleted the message, what other activity has occurred on the system since that time and whether or not the user purposefully attempted to push the email out of the local email archive.


    i. Messages recovered from the application database structure


    Most email systems have an accompanying client side application (groupwise, outlook, notes) that store the emails they receive into a database like structure. Typically when these emails are deleted they remain within the database like structure until they are flushed out (such as using the outlook compact and repair function). Until that occurs then most of the major commercially available forensic tools (Paraben's email examiner, Encase Forensic, Forensic Toolkit) can recover these deleted messages if they support the file format. If you are looking for a free option you might try the steps outlined here but that could become quite burdensome if you have a large number of messages to recover.

    ii. Messages recovered from the unallocated space

    Depending on the email client used the data will either be in plain text in the unallocated space for easy carving or it may be stored in some binary format such as the case with deleted messages from most outlook pst's. Outlook pst's support a data encoding format known as outlook compressible encryption. When this data is pushed out of the pst structure either over time or through the operation of a compact and repair the message will then exist in the unallocated space but be encoded in OCE. The only tool I know of currently that can search for OCE data in the unallocated space is encase. However the temporary files made by Microsoft Word, which has been the default editor for emails inside of Outlook since at least 2003, are recoverable as plain or Unicode text in the unallocated space.

  2. Recovery of deleted messages from the live server


    Most email servers don't flush out emails from their database when the user deletes them. If you or your IT contact has administrative access to the email server you can ask them to recover recently deleted messages from the live server. In exchange there is what has been called a 'dumpster' functionality that will retain emails for a definable set of days (default of 14 I believe). In groupwise you can recover deleted messages using tools like network email examiner or the salvage utility. In lotus notes you could either check to see if the 'soft delete' option was set and for how long it will retain messages or again use commercial tools. There are not many (any?) open source or free tools for dealing with enterprise email server solutions.


    If the email server has flushed out the message recovering the message from the unallocated space becomes more difficult since I don't know the encoding of the message. If you are dealing with a sendmail/imail server like Iplanet you can recover the messages in the unallocated space through regex searches for headers.


  3. Recovery of deleted messages from backup


    When all else fails you can go to backup, usually tape. Restore the email database for the relevant time intervals to hopefully capture the email it was not purged the same day it was deleted, not very typical. You can restore the tape with either the native software (netbackup, backupexec, arcserve, etc…) or with software that supports your tape format (Ontrack Powercontrols, Quest Recovery Manger for Exchange). Then you will need to access the email database either with the native email server in a recovery environment or with a tool that supports reading the database directly (network email examiner, Ontrack Powercontrols, Quest Recovery Manger for Exchange). Once you've done this you can see if the emails you are looking for exist. This is a very detailed topic on the variances of backup software for the forensic examiner and data available, I plan to make separate posts about each of the major backup formats and tape examination techniques.


  4. What did they take


    Now that we have the email messages we can see what was forwarded and attached to those messages to make a list of those files, email addresses and subject matters. In my job I have no knowledge of internal matters so I have to hand over this data to counsel so they can determine what that was sent to themselves contained relevant data.

Method 2 – Email via webmail

  1. How did they take data from the system


    The first step I would perform is examining the internet history of the user. If they did not clear out their internet history then you can look through it for webmail websites they have been visiting. The majority of webmail services are either free or in the case of a hosted website they own will be using a free webmail package (like squirrel mail). We can use these sites to get unique keywords they display in either the html source of the page or in the rendered page itself to identify specific pages of interest.


    The nature of how we send and receive data to websites dictates what is and is not recoverable. We can recover pages they have viewed, such as the contents of a mailbox/folder . We can see messages received the form to write an email but not the email they wrote. So we can look for the most recent views of their inbox for emails they have sent to themselves with files attached. Many people have said that gmail no longer leaves cached emails for us to recover. This is not in fact true, the move to the ajax model means we no longer have a separate cached page for every email viewed, instead we have to look at the virtual memory (pagefile.sys in windows, the swap partition in unix based systems) to find these email remnants.


  2. What did they take


    Most webmail sites will separately make a pop up or page for attaching files and giving notification of successfully attached files. This is good for us as we can recover each notification page and make a list of what files they sent themselves. In addition some suspects are nice enough to open each email they forwarded to themselves to just make sure they got their files.


There are three more methods to detail, but I don't want to wait another day to get this up. To be continued in part 4.



Sejarah Musik Metal

heavy metal ditemukan oleh band veteran tahun 60`an steppenwolf, dalam lagu klasiknya yang berjudul `Born To be Wild`.
"i like smoke and lightning heavy metal thunder Racin` with the wind and the feelin`that i`am under".Tapi istilah itu belum dipakai secara tepat sampai pada tahun 1970, ketika black sabbath merilis album perdana "paranoid".


cukup banyak band heavy metal. dari tahun 1960an atau bisa disebut blues Rock seperti Led Zepplin, AC/DC classic metal
dan disekitar 60an sampai 70an atau disebut classic rock seperti black sabbath, Blue Oyster Cult, deep purple, alice cooper. permainan
classic metal dimainkan kadang dengan organ. Musiknya dikendalikan oleh riff yang lebih sering dimainkan dalam tangga nada minor. vokalisnya
uga terpengaruh oleh led zeppelin kecuali bapak metal Ozzy Osbourne yang dipengaruhi oleh sirene udara.

Thrash metal, power metal, speed metal black metal, death metal, grindcore tempo lagu sangat cepat yang diusung oleh gitaris yang memainkan gitar rhytm
downstroke pada thrash metal oleh band band seperti metalica, megadeath, slayer dan anthrax yang dijuluki big four of thrash.

Sabtu, 28 Maret 2009

Preventing Tooth Decay

Meet Sir Edward Mellanby, the man who discovered vitamin D. Along with his wife, Dr. May Mellanby, he identified dietary factors that control the formation and repair of teeth and bones. He also identified the primary cause of rickets (vitamin D deficiency) and the effect of phytic acid on mineral absorption. Truly a great man! This research began in the 1910s and continued through the 1940s.

What he discovered about tooth and bone formation is profound, disarmingly simple, and largely forgotten. I remember going to the dentist as a child. He told me I had good teeth. I informed him that I tried to eat well and stay away from sweets. He explained to me that I had good teeth because of genetics, not my diet. I was skeptical at the time, and rightly so.

Tooth structure is primarily determined during growth. Well-formed teeth are highly resistant to decay, while poorly-formed teeth are cavity-prone. Drs. Mellanby demonstrated this by showing a strong correlation between tooth enamel defects and cavities in British children. The following graph is drawn from several studies he compiled in the book Nutrition and Disease (1934). "Hypoplastic" refers to enamel that's poorly formed on a microscopic level.
The graph is confusing, so don't worry if you're having a hard time interpreting it. If you look at the blue bar representing children with well-formed teeth, you can see that 77% of them have no cavities, and only 7.5% have severe cavities (a "3" on the X axis). Looking at the green bar, only 6% of children with the worst enamel structure are without cavities, while 74% have severe cavities. Enamel structure is VERY strongly related to cavity prevalence.

What determines enamel structure during growth? Drs. Mellanby identified three dominant factors:
  1. The mineral content of the diet
  2. The fat-soluble vitamin content of the diet, chiefly vitamin D
  3. The availability of minerals for absorption, determined largely by the diet's phytic acid content
Teeth and bones are a mineralized protein scaffold. Vitamin D influences the quality of the protein scaffold that's laid down, and the handling of the elements that mineralize it. For the scaffold to mineralize, the diet has to contain enough minerals, primarily calcium and phosphorus. Vitamin D allows the digestive system to absorb the minerals, but it can only absorb them if they aren't bound by phytic acid. Phytic acid is an anti-nutrient found primarily in unfermented seeds such as grains. So the process depends on getting minerals (sufficient minerals in the diet and low phytic acid) and putting them in the right place (fat-soluble vitamins).

Optimal tooth and bone formation occurs only on a diet that is sufficient in minerals, fat-soluble vitamins, and low in phytic acid
. Drs. Mellanby used dogs in their experiments, which it turns out are a good model for tooth formation in humans for a reason I'll explain later. From Nutrition and Disease:
Thus, if growing puppies are given a limited amount of separated [skim] milk together with cereals, lean meat, orange juice, and yeast (i.e., a diet containing sufficient energy value and also sufficient proteins, carbohydrates, vitamins B and C, and salts), defectively formed teeth will result. If some rich source of vitamin D be added, such as cod-liver oil or egg-yolk, the structure of the teeth will be greatly improved, while the addition of oils such as olive... leaves the teeth as badly formed as when the basal diet only is given... If, when the vitamin D intake is deficient, the cereal part of the diet is increased, or if wheat germ [high in phytic acid] replaces white flour, or, again, if oatmeal [high in phytic acid] is substituted for white flour, then the teeth tend to be worse in structure, but if, under these conditions, the calcium intake is increased, then calcification [the deposition of calcium in the teeth] is improved.
Other researchers initially disputed the Mellanbys' results because they weren't able to replicate the findings in rats. It turns out, rats produce the phytic acid-degrading enzyme phytase in their small intestine, so they can extract minerals from unfermented grains better than dogs. Humans also produce phytase, but at levels so low they don't significantly degrade phytic acid. The small intestine of rats has about 30 times the phytase activity of the human small intestine, again demonstrating that humans are not well adapted to eating grains. Our ability to extract minerals from seeds is comparable to that of dogs, which shows that the Mellanbys' results are more applicable to humans than those in rats.

Drs. Mellanby found that the same three factors determine bone quality in dogs as well, which I may discuss in another post.

Is there anything someone with fully formed enamel can do to prevent tooth decay? Drs. Mellanby showed (in humans this time) that not only can tooth decay be prevented by a good diet, it can be almost completely reversed even if it's already present. Dr. Weston Price used a similar method to reverse tooth decay as well. I'll discuss that in my next post.

Rabu, 25 Maret 2009

What did they take when they left? Part 2 – Finding out what they ran before they left

Hello Reader,

        In Part 1 we discussed how to determine if a CD was burned. Knowing what application it was burned with and what other tools they ran before they left is also important.

  1. User Assist

One way to determine this is with the user assist registry keys. Over the years since the user assist registry keys were first discovered (they were included in our windows analysis chapter in 2005) many people have realized the impact it can have on their case. The User Assistance functionality has existed since Windows 2000 and is a registry key divided into two parts that keeps track of recently used programs and files for the start menu.

The user assist registry key exists in each user's ntuser.dat under the key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist

Of which there are multiple keys depending on the version of windows you are examining, two for windows 2000, xp, 2003 and three for windows vista, server 2008, under which you will find a count key that contains the actual data we are looking for. Entries are encoded in rot13 and if you are not using one the tools listed in this blog you will need to decode them yourself to read the entries.


 

There are multiple tools that support the user assist registry keys for analysis (Accessdata's registry viewer and Didier Stevens tool for instance) that will quickly allow you to see:

  1. What program or file was accessed
  2. How many times the program or file has been accessed through windows explorer
  3. The last time the program or file was accessed through windows explorer

As a simple example, I use Microsoft Office a lot. In fact I write my blog posts in it as it can directly post them to blogger (hopefully catching all my typos). So a decoded user assist entry for Office in my registry looks like this:

"{75048700-EF1F-11D0-9888-006097DEACF9}","20","UEME_RUNPATH:C:\Program Files\Microsoft Office\Office12\WINWORD.EXE","","54","37","3/22/2009 9:25:59 PM"

This entry was found in:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist\{75048700-EF1F-11D0-9888-006097DEACF9}\Count

Decoding the entry section by section we see:

  1. {75048700-EF1F-11D0-9888-006097DEACF9} - the registry key under user assist that this belongs to, data appears to be grouped into categories based on these id's.
  2. 20 – The index number this number increments as entries are added to this key. In this case this is the 20th entry logged. If you have a program executed multiple times, such as my Word 2007 program, sorting by the index number will give you an idea of when it was first executed.
  3. UEME_RUNPATH:C:\Program Files\Microsoft Office\Office12\WINWORD.EXE – This is two pieces of info combined into one:
    1. UEME_RUNPATH – This is the prefix for all entries that will give you a full path to the program or file being accessed
    2. C:\Program Files\Microsoft Office\Office12\WINWORD.EXE – this is the full path to the program or file executed
  4. 54 – This is the session, its use is still unknown
  5. 37 – This is the number of times the program has been executed
  6. 3/22/2009 9:25:59 PM – This is the last time the key was updated and should be the last time it was executed

Going through the user assist then allows us to find out what programs where being executed around the time that for instance a CD was burned. Sorting the entries for that time we can see what was being executed around that time. If there is no corresponding entry you may want to look at the restore points for backups of the ntuser.dat close to time of the burn to find the program executed.

If the user assist keys is missing two things could have occurred

  1. The user disabled them, there will be a registry key created showing this if true.
  2. The user has deleted them, this can be an indication of some type of 'cleaning' tool being run such as Crap Cleaner.

Now the user assist registry keys are not the only place to look for what programs have been executed. We don't want to rely solely on access times as they change so easily and don't prove that a program was actually executed. We want to focus on artifacts created because of an execution of which there are two other well documented sets of artifacts that show the actual execution of a program.

  1. Shortcut/Lnk Files

Stored in several locations depending on its function LNK files so named because of the extension '.LNK' that is given to them. We will discuss LNK files in more detail in the next post as they are an extreme wealth of information but for the purposes of this post it can suffice to say that we can use LNK files to determine if a program was executed through it.

The start menu for each user stored from windows 2000 and on is under the user's profile directory (\documents and settings\<user>\start menu in xp and \users\<user>\start menu in vista and 2008) contains a LNK file for each of the files listed in the user's start menu when the click the start button. So each time a user loads a program through it the modified date of the LNK file will change to reflect it. This also applies to any other instance of the lnk file such as in the quick launch bar or on the desktop.

So for instance my Office 2007 LNK file in the start menu shows a created time of 11/24/2008 which is when I installed office 2007 on this computer. The modification date is 3/22/09 9:25pm which is the last time I used the LNK file to load up office 2007. You can see that the prefetch reference below says 9:26pm, it takes a couple second between the time I clicked the LNK and when the prefetch file gets created.


 

  1. Prefetch Files

Stored in the \Windows\Prefetch directory there is one .pf file for each of a max of 128 programs and the last modified time is updated each time the program is executed. The Forensic Wiki has a nice write up on prefetch files. There are several tools out there for parsing prefect files, one that is free is part of the Windows File Analyzer program. If I were to analyze the prefetch file for Office 2007 I would see the following:

File name: WINWORD.EXE-6AC9169C.pf

Last loaded: 3/22/09 and 9:26PM

This is when I started writing this blog post, it's been a couple days of research catching up on old topics to see what people have figured out.

So the prefetch file is a third correlation point we can use to determine if and when a program has been executed.

  1. Conclusion

So we now have three separate sources on a typical Windows system that we can use to determine what programs had been executed (the first and last times), when and how many times they have been executed. These are not the only places we can look for this information but they are three of the most reliable due to the nature of their creation and use. If you find that all of this data is missing then it becomes almost certain that either

  1. The system is being reimaged each time it reboots/logs in (some public access terminals do this)
  2. A cleaning/wiping tool has been run

I plan to make a post on how to determine what a user has wiped after this series but if a cleaning tool has not been run one or all of these sources will allow you to state for a fact what program was executed to:

  1. Run a backup program (such as the ones that are packaged with some external hard drives like retrospect)
  2. Burn a CD
  3. Run an ftp program
  4. Access some kind of archiving or copy tool

Which will then lead to the next question and our next post in the series : Part 3 - Where did it go and what did they take?

 

ZOOM UNIK::UNIK DAN UNIK Copyright © 2012 Fast Loading -- Powered by Blogger